Workbench
The Home Assistant integrations I wrote when nothing else did the job. They're all open source on GitHub under EndOfTheLine-HA (opens in a new tab), and each repository has the install steps, releases and issues.
Published integrations
Everything else in my Home Assistant, other people's work included, is on My integrations.
- Audio
No Hassle AV Amplifier
No Hassle AV Amplifier for Home Assistant: a 6-zone Monoprice-protocol amplifier with bass, treble and balance on every zone.
Import from Monoprice is available in published v0.1.0. The unreleased v0.2.0 code on main removes that import and uses a fresh setup. Check the version-specific instructions before migrating.
ha-nohassle-amp(opens in a new tab)Add by link
Not in the HACS community catalog. Add it with Add from link under Settings > Marketplace, which needs a GitHub connection. The amplifier's catalog submission was declined; it is separate from the HDMI matrix integration. Before Home Assistant 2026.11, add it to HACS as a custom repository.
Catalog decision for No Hassle AV Amplifier (opens in a new tab) - Video routing
No Hassle AV HDMI Matrix
Home Assistant integration for a No Hassle AV 8x8 HDMI matrix: choose the input for each output, route one input to every output, and power the matrix on or off
Amplifier support is a separate project, ha-nohassle-amp.
ha-nohassle-av(opens in a new tab)In the HACS community catalog
Find it by name under Settings > Marketplace. No link needed. Before Home Assistant 2026.11, find it in HACS.
Catalog acceptance for No Hassle AV HDMI Matrix (opens in a new tab) - Alerts
Bark Alerts
Home Assistant integration that responds to Frigate dog-bark detections by sending a beep-only command to a compatible RF collar through Broadlink.
ha-bark-alerts(opens in a new tab)In the HACS community catalog
Find it by name under Settings > Marketplace. No link needed. Before Home Assistant 2026.11, find it in HACS.
Catalog acceptance for Bark Alerts (opens in a new tab) - Camera audio
Ring Camera Messages
Home Assistant text-to-speech messages on Ring cameras via Ring-MQTT
Requires Home Assistant 2026.11 or newer and a separately installed Ring-MQTT Speaker Bridge. Tested on Ring Doorbell Pro and Floodlight Cam Pro.
ring-camera-messages(opens in a new tab)In the HACS community catalog
Find it by name under Settings > Marketplace. No link needed. Before Home Assistant 2026.11, find it in HACS.
Catalog acceptance for Ring Camera Messages (opens in a new tab) - Camera audio
Blink Camera Messages
Home Assistant buttons and actions for spoken messages on Blink cameras via BlinkBridge
Requires Home Assistant 2026.11 or newer, MQTT and a separately running BlinkBridge with speaker support. Tested on a Blink Mini.
blink-camera-messages(opens in a new tab)In the HACS community catalog
Find it by name under Settings > Marketplace. No link needed. Before Home Assistant 2026.11, find it in HACS.
Catalog acceptance for Blink Camera Messages (opens in a new tab) - Guest access
Limited Access Dashboard
Password-protected, time-limited Home Assistant-style dashboards with only the controls each guest needs.
ha-limited-access-dashboard(opens in a new tab)In the HACS community catalog
Find it by name under Settings > Marketplace. No link needed. Before Home Assistant 2026.11, find it in HACS.
Catalog acceptance for Limited Access Dashboard (opens in a new tab) - Water systems
Pentek IntelliDrive
Read-only Home Assistant monitoring for Pentek IntelliDrive PID50 pump controllers over Modbus TCP.
ha-pentek-intellidrive(opens in a new tab)In the HACS community catalog
Find it by name under Settings > Marketplace. No link needed. Before Home Assistant 2026.11, find it in HACS.
Catalog acceptance for Pentek IntelliDrive (opens in a new tab) - Energy
Power Probe
How much power does this device use? Home Assistant integration that measures it with your whole-home energy meter, no smart plug needed, and hands the result to Powercalc.
ha-power-probe(opens in a new tab)Add by link
Not in the HACS community catalog. Add it with Add from link under Settings > Marketplace, which needs a GitHub connection. Before Home Assistant 2026.11, add it to HACS as a custom repository.
- Monitoring
Website Health
Is it down, or is it me? Home Assistant integration that checks your website really works (required text, JSON keys) and tells a site outage from your own internet outage.
ha-website-health(opens in a new tab)In the HACS community catalog
Find it by name under Settings > Marketplace. No link needed. Before Home Assistant 2026.11, find it in HACS.
Catalog acceptance for Website Health (opens in a new tab) - Experimental video
BlinkBridge
Experimental, unofficial Blink-to-RTSP fork focused on Frigate, with resilient clip streaming and optional Live View.
blinkbridge(opens in a new tab)Not in the Marketplace
Experimental fork. Follow its separate server setup instructions.
Catalog status checked . Being in the catalog says nothing about whether I run it.
Still on the bench
Running in my house, not published yet.
- Floor3D Presence
A frontend companion for room-based character movement in a 3D floor plan. Not yet published.
- Floor3D Pro Add-ons
Rendering improvements and GLB compatibility fixes for Floor3D Pro Card. Not yet published.
Retired
- Retired
Monoprice tone controls
Temporary: Home Assistant's Monoprice 6-zone amplifier integration with bass, treble and balance controls, until core gains them
Retired in favour of ha-nohassle-amp. The repository remains available for migration instructions.
ha-monoprice-tone-controls(opens in a new tab)Not in the Marketplace
Archived and retired. See the repository for migration guidance.